Cooling towers

Cooling towers

Cooling Tower is a familiar name in industrial terminology. These are basically heat removal devises that transfers process waste heat and provides ambient and normal water circulation systems to the process industry.  An HVAC (heating, ventilating, and air conditioning) cooling tower is used to dispose of ("reject") unwanted heat from a chiller. Water-cooled chillers are normally more energy efficient than air-cooled chillers due to heat rejection to tower water at or near wet-bulb temperatures. Air-cooled chillers must reject heat at the higher dry-bulb temperature, and thus have a lower average reverse-Carnot cycle effectiveness. Large office buildings, hospitals, and schools typically use one or more cooling towers as part of their air conditioning systems. Generally, industrial cooling towers are much larger than HVAC towers.

These towers are a pretty common and conspicuous sight in several heavy industries such as power, pharmaceutical, steel and other related sectors. Usually cooling towers are gigantic water circulatory systems in parabolic and conical shapes that transfer heat from the process by using thin film technology. Cooling Tower is a heat rejection device, which extracts waste heat to the atmosphere through the cooling of a water stream to a lower temperature.
It is an important equipment in your plant, which optimizes the process and ensures the best production yield. We offer to our clients  technically advanced range of FRP cooling tower which come precision engineered to provide superior cooling.

As responsible manufacturers of these towers we spent enormous amounts of money and energy and brought revolutionary changes in the design, material and made these Towers in to more efficient and maintenance free systems.  These revolutionary designs use Fiber reinforced plastics in designing and building Cooling Towers. In short these Cooling Towers are called FRP type Cooling Towers. Cooling towers are also used in HVAC systems that have multiple water source heat pumps that share a common piping water loop. In this type of system, the water circulating inside the water loop removes heat from the condenser of the heat pumps whenever the heat pumps are working in the cooling mode, then the externally mounted cooling tower is used to remove heat from the water loop and reject it to the atmosphere. By contrast, when the heat pumps are working in heating mode, the condensers draw heat out of the loop water and reject it into the space to be heated. When the water loop is being used primarily to supply heat to the building, the cooling tower is normally shut down (and may be drained or winterized to prevent freeze damage), and heat is supplied by other means, usually from separate boilers.